Wardrobe

Shirt Collar Size: What 15.5 Inches Actually Measures

Collar size is an inside circumference with ease built in, not your neck. How to read inch and centimetre sizes, point length and shrinkage.

Reviewed by Tessa Marlow · Updated Oct 18, 2026

The numbers first

  • A 15.5 inch collar is not 15.5 inches of neck.
  • It is the inside circumference of a buttoned collar, measured around the band, and it already includes about 1.5 cm of ease.
  • Do not add a second finger for "comfort": shirt makers build 1.2 to 1.5 cm of ease into the finished collar, and a second finger often doubles it.
  • Half-inch steps are 1.27 cm, while European sizes move in whole centimetres, so a 16 inch collar lands between 40 and 41 on most conversion charts.

A 15.5 inch collar is not 15.5 inches of neck. It is the inside circumference of a buttoned collar, measured around the band, and it already includes about 1.5 cm of ease. Your neck is the smaller number, and the gap is the shirt.

Measure the neck, not the old collar

Run the tape around the base of the neck, at the point where the collar band sits, not at the widest part. Keep one finger under the tape. Do not add a second finger for “comfort”: shirt makers build 1.2 to 1.5 cm of ease into the finished collar, and a second finger often doubles it.

A close-up of a pale blue cotton shirt showing the collar and buttons
A close-up of a pale blue cotton shirt showing the collar and buttons

Measure in the afternoon if you can. Necks swell slightly through the day, and a collar that fits at 8 a.m. can press at 6 p.m.

Measuring an old shirt instead of the neck fails for a boring reason: collars change. Fabric stretches at the buttonhole, the button shank sits forward of the band, and a collar that has been washed forty times is not the collar the label described. If a shirt is the only source you have, button it flat and measure the inside of the band, then accept that the reading reflects the wear as much as the size.

Inch sizes and centimetre sizes do not quite line up

Collar (in)Collar (cm)Typical neck
14.53736 cm
153837 cm
15.539.538 cm
164139.5 cm
16.54240.5 cm
174341.5 cm

Half-inch steps are 1.27 cm, while European sizes move in whole centimetres, so a 16 inch collar lands between 40 and 41 on most conversion charts. When both are printed, use the centimetre number on the tag and ignore the converted inch figure.

Brands also round differently. A 15.5 inch collar is 39.4 cm, and one label prints that as 39 while another prints 40, so two shirts marked one centimetre apart can be the same finished collar. It is the same problem that size conversion between systems handles for shoes and bags: the number on the tag is an index, and only the unit on the tape is real.

Collar point length changes the look, not the fit

Point length runs from the collar band seam to the tip. Dress shirts usually sit between 7 and 9 cm. A point under 7 cm reads casual and works without a tie; past 9 cm the points spread wide and demand a wide knot.

The spread is the distance between the two points when the collar is buttoned, usually 8 to 11 cm. A narrow spread of 7 cm makes a small knot look larger. None of this changes the neck size, which is why a shirt can fit at the collar and still look wrong.

Listings often omit point length. Measure it on a shirt you already like: collar folded, tape from the band seam to the tip. Write the number down. It is the only collar measurement besides size that you need to reproduce a shirt that works.

Shrinkage is the number nobody budgets

Cotton shrinks along the warp more than the weft. An untreated poplin collar can lose 1 to 2 percent in the first few washes, which is 4 to 8 mm on a 39 cm collar. That is the difference between a collar that closes with a finger of room and one that does not.

Pre-shrunk and sanforized cotton lose under 1 percent. The label will say so if the fabric was treated. If it does not, buy the half size up, especially in oxford cloth, which is woven loosely and moves more than poplin.

One-piece and two-piece collars

Most dress shirts are built in two pieces: a band that circles the neck, and the leaf — the pointed part — stitched onto it. The seam between them is what allows the leaf to roll over the band instead of folding flat, and roll is what makes a collar sit on the shirt rather than lie on it.

One-piece collars are cut from a single piece of cloth that folds over on itself. Without the band seam they sit lower and softer, and they read casual even when pressed hard. If a listing calls out the construction, it is telling you how the collar will age: the two-piece build keeps its architecture through washes, the one-piece relaxes into whatever shape the fabric remembers. Open-necked, both sit acceptably; under a jacket, the difference in roll is what shows.

The collar band is a separate measurement

Band height is the depth of the strip that holds the collar stand, usually 3 to 4 cm at the front and slightly less at the back. A 4 cm band with a stiff fuse stands up under a tie. A 3 cm band in soft cotton collapses, which is fine without a tie and untidy with one.

Read the construction notes before the size. A fused collar keeps its shape through washes and bubbles eventually; an unfused one softens and lasts longer if it is pressed.

You can feel the difference without reading anything. Fold the collar back on itself: fused interlining feels like card and snaps back flat, while unfused drapes and recovers slowly. The same pinch finds lumps or early delamination that no product page will mention. Spec sheets list the interlining, and fabric weight tells you how much the cloth will move in the wash.

What the fitting mirror shows

Each failure maps to one measurement. A gap at the back of the neck means the band is too big, and collar size is the number to blame. Points that stand off the chest, or a knot that will not fill the spread, are point length and spread problems — style measurements, not fit ones. A top button that closes only with a pull means the built-in ease is spent, and no iron will fix it. Stretching the buttonhole is not a fix either; it distorts the placket and moves the strain one button lower. A collar that looks right standing but bites when you sit down is reporting the afternoon swell that arrived after the measurement was taken.

Do the test seated, in the afternoon, buttoned to the top. It costs nothing, and it answers more questions than the size on the bag.

More in Wardrobe

FAQ

How do I measure my collar size?
Run the tape around the base of the neck, where a collar band sits, and keep one finger under the tape. That gap is the ease already built into the shirt. Round up to the next half inch or whole centimetre.
Is a 15.5 inch collar the same as 39 cm?
Very close. A 15.5 inch collar is 39.4 cm, and European shirts sell that as 39 or 40 depending on the brand. The half sizes in inches do not map cleanly to whole centimetres, so trust the centimetre figure on the tag.
How much does a cotton shirt collar shrink?
A cotton shirt that is not pre-shrunk can lose 1 to 2 percent in the first washes, which is roughly 4 to 8 mm on a 39 cm collar. Pre-shrunk and sanforized fabric loses less than 1 percent.

Second Look

Every figure used above, with the section it appears in. If a number here does not match the page you are reading, trust the page — and tell us.

15.5 inch
Introduction
15.5 inches
Introduction
1.5 cm
Introduction
36 cm
Inch sizes and centimetre sizes do not quite line up
37 cm
Inch sizes and centimetre sizes do not quite line up
38 cm
Inch sizes and centimetre sizes do not quite line up
39.5 cm
Inch sizes and centimetre sizes do not quite line up
40.5 cm
Inch sizes and centimetre sizes do not quite line up

Tessa Marlow

Writes about garment construction, leather goods and footwear specs. Started in retail floor management before moving to editorial research. Our standards.